Tracked Sliding Gates

It appears Flash is not installed on your system or is being blocked.

To see the image gallery you will need the free Flash viewer installed on your PC, click the button below to install it 

Click here to install

Davidson and Pearson's range of steel tracked sliding gates is our most economical type of sliding gate and can accommodate openings in excess of 25.00m in a single leaf or 50.00m as a bi-parting pair. These sliding gates are suitable for heavy duty applications and will provide long service life with a minimum of maintenance

These robust and reliable gates are also very adaptable. The number and position of guide posts and the position of the drive system can be arranged to suit the site. The solid hot rolled steel track upon which the gate runs only protrudes 10 – 15mm above the finished road surface.

The drive system and fully programmable control panel are enclosed in a 'half height' weatherproof housing, with steel lockable access door. 

All our tracked sliding gates are bespoke and are manufactured for specific site requirements and they can accommodate crossfalls by utilising trapezoidal or parallelogram leaf construction. All gates are treated with our '3Plus' long term corrosion protection, comply with current safety requirements and come with fail safe buffers and photo cells.

A full back up service can be provided for site surveys, design, installation, commissioning and servicing, if required. Free technical advice is always available at any stage, before, during or after installation. 


distributors for DAAB gate drives and barriers UK
distributors for Zabag Security Engineering gates, barriers and turnstiles